Labels - Tagit

Introduction to Tagit labels
March 2009
Tagit produce every type of EM labels competible to any EM system in the market.

First letter in our item code	Compatible with	Active ribbon information
B	Tagit, Sensormatic J2, Sensormatic Wide Exit, Knogo, Certus, Gateway, Dialoc	0.7mm wide
H	Labels of at least 63mm for Sensormatic Wide Exit, Certus, Dialoc, Gateway and all analogue systems	1.0mm wide
C	Labels of at least 63mm for Sensormatic Wide Exit, Certus, Dialoc, Gateway and all analogue systems	1.5 mm wide
M	Meto	0.6mm wide
W	Meto	Micro-wire 60mmk
D	Dual ribbons for B and M labels. Contains 2 ribbons- one B and one M. It compatible for both Tagit (and Certus) and Meto. Best for source tagging.

The length of label is determined in the second and third digits of our item code:

32= 32mm

40= 40mm

49= 49mm

50= 50mm

51= 51mm

58= 58mm

63= 63mm

90= 90mm

12= 120mm

16= 160mm

Special exception
Power Labels - 32x10mm labels for Tagit, Sensormatic J, Certus extrimly important for perfium , jewerly and other small items. The item code will begin with BP3

There are different possible finishes to the label surface. It is determined in the 4th digit in the item code:
W= white
B= dummy barcode
C= clear
S= black
P= preprint

The fifth letter of our item code represents the deactivation of the label

Fifth letter in our item code	Description
D	Regular slugs of 6mm each
T	Thermal Spot deactivation - continious ribbon with thermal spots
S	Strip deactivation, complete strip of deactivation material on the active ribbon.
N	Non deactivatible label, without deactivation ribbon.
The diffetence between the first 2 option is the smoother surface of the spot deactivation which make it more suitable for printing- the deactivation with the two types is the same.

The 6th digit represents the required quantity of labels in one packaging unit:

1= 1,000 labels

3= 300 labels

4= 400 labels

5= 500 labels

6= 600 labels

If you have a different request of packaging- please let us know and our representatives will make all efforts to oblige

The 7th digit represents the glue:

1	one side glue
2	double side glue
0	no glue (push-in and drop-in labels)

Rolls or sheets (8th digit)

R	Rolls: all lengths between 32 mm and 90 mm can be made in roll. Packaging is either in dispensers or in rolls (dimensions are the length of label X 10mm)
N	Narrow Rolls: available in 32 and 51mm labels (dimensions are the length of label X 6mm)
S	Sheets- Sheet are manufactured in length of 51, 63, 90 and 120 mm, width 6 mm packaged 9 labels per sheet shrink packed in 1000 labels
P	Push-in labels - Labels enclosed in a rigid clear plastic, 50 and 63 mm by 4 mm
D	Drop-in labels - white without glue 51, 63 and 90 mm long by 6 mm width
W	Cross-web labels - 32x19mm labels. with strips, MW, deactivatable and non deactivatable. Thermal transfer labels 49x27mm with 0.6mm strip or MW-deactiva or not deactive
T	Tail tags for libraries - 165x4 and 120x4 with tail in both sides for 3M , Tagit, Dialog, Wide Exit, Knogo and others....

close <<

Tagit^TM are world leading manufacturers of a complete range of EM security tags. We manufacture and market library security tag products under our own name, and we also manufacture EM security tags for some of our competitors. Produced from superior grade metallurgical elements in modern manufacturing resources located within Europe, our EM strip materials are second to none in quality and detection performance.

Library Oriented Labels

Single Sided Library Tags 12cm

Common in Libraries, especially those using 3M systems. The labels will work in a variety of other systems equally.

Label dimensions:
120mm x 6mm

Double Sided Sticky Labels

Common in Libraries inside the spine of books or between the pages in the books centre.

Label dimensions:
63mm x 6mm (Barkhausen & Harmonic)

Tail Tags

Common in Libraries, especially those using 3M systems. The labels will work in a variety of other systems equally - (50mm peel off tape on both sides)

Label dimensions:
120mm plus two tails 60mm each. Total length 240mm (packed in boxes of 1000)
165mm plus two tails 82.5mm each. Total length 330mm (packed in boxes of 1000)

close <<

Dual Frequency "EM" Label

Due to there being a mixture of EM systems in the market, the dual frequency will allow for a good detection in both Barkhausen and Harmonic based systems.

Label dimensions:
51mm x 12mm (Rolls)

White Labels

The Drop-In labels are mainly used in the book sector. The label is simply placed close to the inside of the pages and through the pressure of the paper, the labels stays in place – even if you shake the book.

Label dimensions:
51mm x 6mm (Bags)
63mm x 6mm (Bags)
90mm x 6mm (Bags)

Clear Labels

The Push-In labels are hard enough to be pushed through blister packaging or foil wrapping on a CD.

Label dimensions:
63mm x 4mm

close <<